SILICONE SLEEVES FOR CORONA TREATMENT ROLLS

General Characteristics Chemically stable with no harmful toxic or physiological effects.  Electrically insulating and formulated for maximum resistance to ozone and corona discharge. Suitable for continuous operation at 355oF (180oC) and intermittent operation at higher temperatures without loss of mechanical and dielectric properties. Resilient and flexible for ease of installation onto treatment rolls.  Low flammability and low smoke in the event of fire.  Manufactured in ISO 9000 quality assured plant.

Availability

• Standard size range

Roll Diameter	Sleeve ID
(inch)	inch	mm
1.5	1.340 +/- 0.040	34.0 +/- 1.0
2.0	1.810 +/- 0.060	46.0 +/- 1.5
2.5	2.240 +/- 0.060	57.0 +/- 1.5
3.0	2.680 +/- 0.080	68.0 +/- 2.0
3.5	3.150 +/- 0.080	80.0 +/- 2.0
4.0	3.540 +/- 0.080	90.0 +/- 2.0
6.0	5.500 +/- 0.120	140.0 +/- 3.0
8.0	7.480 +/- 0.160	190.0 +/- 4.0

• Standard wall thickness 0.080 +/- 0.008 inch (2.0 +/- 0.2 mm)

• Roll lengths 400” or cut to order

• Normally available from stock in orange color

• Special sizes and colors available on request, subject to minimum order.

Physical Properties

Associated Products

Extruded silicone tubing, cord and profiles

Molded hose and profile sections, e.g. angle pieces, filler tubes

Silicone rubber sheet

Silicone sponge / foam profiles

Silicone sponge / foam sheets

Reinforced silicone pressure hose

Silicone moldings

© Copyright 1997-2005 Ipotec, Inc. All rights reserved.