EXPANDED, CLOSED-CELL SILICONE SPONGE / FOAM PROFILES

Tube Sections

Dimension Limits, inch (mm)
Ref Minimum Maximum
D 0.080 (2.0) 2.250 (57)
E 0.080 (2.0) 0.600 (15)
F 0.250 (6.4) 2.750 (70)

The above dimension limits are for guidance only and may not be possible with all material grades. Normal dimensional tolerance +/-10%.

Standard Sizes
Inside Diameter, D Wall Thickness, E Outside Diameter, F
inch mm inch mm inch mm
1/4 0.250 6.4 3/8 0.375 9.5 1 1.000 25.4
1/2 0.500 12.7 3/8 0.375 9.5 1-1/4 1.250 31.8
3/4 0.750 19.1 3/8 0.375 9.5 1-1/2 1.500 38.1
1 1.000 25.4 3/8 0.375 9.5 1-3/4 1.750 44.5
1-1/4 1.250 31.8 3/8 0.375 9.5 2 2.000 50.8
1-1/2 1.500 38.1 3/8 0.375 9.5 2-1/4 2.250 57.2

 

Return to Sponge / Foam Profiles

Return to Ipotec Profile

© Copyright 1997-2005 Ipotec, Inc. All rights reserved.